Sensiplast KINESIOLOGY TAPE - Handbuch (Seite 10)

10
Removing the paper
The product comes on paper, which must be
removed. You can tear the paper or roll the
product off the paper.
Important! Do not touch the adhesive
side of the product, as the product will
otherwise lose adhesion.
• Tearing the paper:
1. Hold the cut product in your hand.
2. Pull on both ends until the paper tears
(Fig. G).
3. Remove the paper from one product end
(Fig. H).
• Rolling the product off the paper:
1. Hold the cut product in your hand.
2. Carefully roll one product end off the paper
with your index finger (Fig. I).
3. Hold on to the unrolled product end and
pull the product off the paper (Fig. J).
Neck
Indication: For tight shoulder/neck muscles.
Note: In this case a second person
should help you apply the product.
1. Examine the pattern of the neck muscles
and measure the area of the body.
2. Prepare the product as an I-shape.
3. Lean the head to the opposite side to tighten
the neck muscle.
4. Apply the product to the area of the body
using slight tension. The end of the product
should be secured without tension (Fig. K).
Shoulder
Note: In this case a second person
should help you apply the product.
Option 1
Indication: For injuries/inflammation of the
supraspinatus muscle and its tendon.
1. Examine the pattern of the shoulder muscles
and measure the area of the body.
2. Prepare the product as an I-shape.
3. Move the bent arm, where you wish to tape
the shoulder, behind the back.
4. Apply the product to the shoulder along the
upper edge of the shoulder blade, using
slight tension (Fig. L).
GB/IE