T+A Elektroakustik PA 820 M - Handbuch (Seite 44)

44
Setting the clock manually
Explanation:
You can set the time of day manually provided that the
setting method (TIME) is set to MAN (manual) (see
section 'Clock - selecting the method of setting the
time').
Operation:
Select TUNER as the listening source:
Press the remote control button     briefly.
To set the clock press the remote control buttons briefly
in the sequence stated above. The screen shows the
current time of day, e. g.:
' 10 10 10 10 - - - - 25 CLK 25 CLK 25 CLK 25 CLK ' .
You can change the time using the     or     buttons.
The time changes slowly initially, but the rate of change
increases if you hold the button pressed in.
You must press the     button to accept the set
time.
The screen displays the updated time of day in the top
left corner, e. g.:
Note:
Once you have set the clock, you can either leave the
menu by pressing the
    button, or move to a
different menu point using the     /     buttons.
Setting the alarm time
Explanation:
In this menu point you can set the alarm time.
Operation:
Select TUNER as the listening source:
Press the remote control button     briefly.
The first step is to adjust the M-system to the exact
settings you wish to use when the alarm switches it on,
i. e. volume, loudspeakers and station.
Now press the remote control buttons briefly in the
sequence stated above. The screen displays the current
alarm time, e. g.:
' 09-00 TIM 09-00 TIM 09-00 TIM 09-00 TIM ' .
This time can be changed using the     or     buttons.
The time changes slowly initially, but the rate of change
increases if you hold the button pressed in.
You must press the     button to accept the set
time. The alarm activates automatically (the red LED
lights), the display shows '
09-00 09-00 09-00 09-00 SET SET SET SET '.
Note:
Once you have set the clock, you can either leave the
menu by pressing the
    button, or move to a
different menu point using the     /     buttons.