IMP Pumps NMT(D) LAN (C) 40-100 & NMT SAN LAN (C) flanges - Handbuch (Seite 33)

-33-
GB
‘192.168.0.245’ you can for example use ‘http://nmtpump’. Default:
nmtpump (NetBIOS name setting),
• Twin mode with IP - will connect two pumps for alternating operation.
When two pumps are configured for twin mode, they will switch about
once per day. Setting this field to inexistent IP will disable this option!
Set it so the first pump references the second and vice versa. Default:
0.0.0.1 (Twin mode with IP setting).
Setting can be saved to permanent memory by pressing the SAVE button.
4. Log (web page LOG) displays possible previous and current errors.
5. HELP (web page HELP) will redirect you to www.imp-pumps.com
Software upgrades and manuals will be available.
5.1.4.2 Finding of a “lost” pump
If you have forgotten IP address or NetBIOS name or if you accidently set
it to an incorrect value, pump can still be found with network analyzers.
Freeware tools like »WireShark« or »EtherDetect« can help you to trace the
pump as it periodically tries to contact its twin. This is true even in the case
of single pump. You can trace out the device that sends out requests and
contact it directly.
• Twin pumps have IP Address 192.168.0.245 and a
NETBIOS name “nmtpump” for the left pump and IP
192.168.0.246 and a NETBIOS name “nmtpump2” for the
right pump respectively.
5.2 Operation
The pump can operate in 5 different modes. We can set the pump in the most
appropriate mode, depending on the system where the pump operates.
The pump modes:
• Automatic mode (factory default)
• Proportional pressure
• Constant pressure
• Constant speed
• Combined mode (all mode indicators are off)
Automatic mode
In automatic mode the pump automatically sets the operating pressure,
depending on the hydraulic system. By doing so, the pump finds the optimal
operating position.
This mode is recommended in most systems.
The parameters cannot be set; they can only be scrolled through.