WolfVision VZ-C32 User Manual - Handbuch (Seite 15)

13
Ethernet / LAN Port 10BASE-T/100Base-TX
The LAN connection (#20) can be used for controlling the Visualizer over a computer
network. Image transfers, firmware updates, displaying status information and e-mail
notifications are possible.
The following protocols are supported: TCP/IP, ICMP and ARP.
d internet b are: /Firefox Supporte rowsers Internet Explorer, Netscape Navigator and Mozilla .
By default, DHCP is activated to receive all network settings automatically.
Possible image transfer resolution on still images up to SXGA- (1280x960).
Please check the separate description of "Built-In Webserver" on our internet homepage at:
www.wolfvision.com/support (or on the supplied CD-Rom).
The USB output (#21) of the Visualizer can be used to
transfer images from a Visualizer to a computer and save
them in JPG, TIF or BMP format. This way, Visualizers can
also be used as scanners for 3-dimensional objects.
WolfVision Visualizers are equipped with a fast USB 2.0
port. This allows uploading images onto a computer in a
fraction of a second.
Connecting slower computers with the older USB 1.1 standard is also no problem. It still
takes only a small fraction of the time a desktop scanner requires to scan an image.
WolfVision's Connectivity Software works under Windows 2000, XP and Vista or Apple
Macintosh OS 10.2 (or higher) and is fully Twain compatible. This is important when using
the Visualizer in connection with popular graphic programs such as Photoshop, or for
connecting them to Interactive Whiteboards (Smart Boards).
The fast USB 2.0 port can also output live motion. The WolfVision Connectivity Software
can store AVI files and includes a video capture driver. You can view and save the live
image from the Visualizer on your computer in almost every modern video editing software.
Please download the latest version of the WolfVision Connectivity Software from:
www.wolfvision.com/support.
USB Port
The complete serial protocol can be found on our internet website under:
www.wolfvision.com/support
The serial port (#19) can be used to control the Visualizer through an external device, such
as a room control system that are used to integrate conference rooms.
Pins: 2: RX, 3: TX, 5: GND
Baud Rate: 9200, 19200, 38400, 57600 or 115200 (selectable)
databits: 8, stopbit: 1, parity: no
The baud rate can be changed in the on-screen extra menu
(see page 16).
RS-232, Serial Control Input
9-pin D-Sub connector
on unit male
(front side)
5
9
2
7
3 4
8
1
6