WolfVision VZ-C32 User Manual - Handbuch (Seite 24)

Codes - Short Keys
22
#27
#32
#33
#37
#39
#29
#30
#35
#25
#28
#31
#34
#38
#40
#36
EXTERN POWER
TELE WIDE L
A
S
E
R
IRIS FREEZE
1 2 3 A A AA
MEMORY
1 2 3
4 5 6
7 8 9
PRESETS IMAGE TURN
VIEW
#26
AF FOCUS
HELP
MENU
ENTER
SNAPSHOT
Storing Presets:
Press one of the PRESET keys (#27) for 2
seconds.
Activating the on-screen menu:
Press the MENU key (#39) (EXTERN key) for 1
second.
One-push auto focus:
Press the AF key (#30).
Storing Images:
Press one of the MEMORY keys (#36) for 2
seconds.
Filling the Image Memory quickly:
By pressing the SNAPSHOT key (#29) the image is
stored in the next free memory (1-9). If the memory
is full, a message appears on the screen.
Press the VIEW key (#32) for more than 4 seconds.
Then follow the instructions of the on-screen menu
(Press MEMORY 1 (#36) for snapshot or
MEMORY 3 (#36) to erase the memory).
Change IR code:
Change the IR code in the
"Misc.
Settings" (code A is default). Change the IR code
on the remote control too by pressing
simultaneously PRESET 1, PRESET 2
27 and
ZOOM TELE 25
in the order given
ress PRESET 1,
PRESET 2 27 and ZOOM WIDE 25 .
Resolution Settings:
Set resolution to AUTO:
Keep pressed both FOCUS keys (#31)
simutaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 5 (#36) key.
Set resolution Up:
Keep pressed both FOCUS keys (#31)
simutaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 2 (#36) key.
The first setting after AUTO is VGA at 60Hz.
Set resolution Down:
Keep pressed both FOCUS keys (#31)
simutaneously for 2 seconds (max. 10sec.),
release it and press the MEMORY 8 (#36) key.
Recall Factory Setting:
Keep pressed both FOCUS keys (#31)
simutaneously for 2 seconds (max. 10sec.), release
it and press the MEMORY 4 (#36) key.
Demo-Mode:
Press the POWER key (#40) for 2 seconds.
on-screen menu
(# )
(# ) to switch from code A to B, C, D
... A ... . For resetting the remote
control to code A simultaneously p
(# ) (# )