WolfVision VZ-C32 User Manual - Handbuch (Seite 7)

5
#25 ZOOM keys
Using the ZOOM keys also switches auto iris on again.
#26 LASER POINTER key
Important: Do not stare directly into the laser beam.
This is hazardous for your eyes!
#27 PRESET keys (programmable settings)
For storing a preset, press one of the PRESET keys for more than 2 seconds. For recalling
a preset, press the PRESET key quickly (see page 9).
#38 IMAGE TURN mode key
For picking up vertical (portrait) pages with higher resolution (see page 12).
#29 SNAP SHOT key
Pressing this key activates the SNAPSHOT function (see page 11).
#30 ONE PUSH AUTO FOCUS (AF) key
Pressing this key performs an One Push Auto Focus (see page 9).
#31 Manual FOCUS keys
For focusing the picture.
By pressing both FOCUS keys an on-push autofocus will be performed (see page 9).
#32 VIEW key
For displaying all 9 pictures of the memory as split image (see page 11).
#33 FREEZE key
Freezes the current image (see page 11).
#34 Manual IRIS keys (brightness adjustment)
When the IRIS keys are pressed, the Visualizer switches off the auto iris function. The next
time the ZOOM keys are used the auto iris is switched on again (see page 9).
For specialists: The behaviour of the iris can be changed in the on-screen menu (see page 16).
The overall iris level can be changed in the on-screen menu (see page 16).
#35 SELECT keys (MEMORY keys 2, 4, 6 and 8)
For navigating through the on-screen menu (see page 16).
#36 MEMORY keys 1 - 9
For saving and recalling pictures (see page 11).
#37 HELP/RESET key for on-screen menu (double function of Memory keys)
While you are in the on-screen menu you can activate the on-screen help by pressing the
HELP key. Pressing this key for 2 seconds resets the selected menu item (see page 16).
#38 ENTER key (double function of Memory keys)
Same function as the right SELECT key (MEMORY key No. 6).
#39 EXTERN key / MENU key
Switches between Visualizer image and external input (for more details - see page 12).
Pressing EXTERN key for 1 second activates the on-screen menu (see page 16).
#40 POWER key
Pressing this key switches the unit on and off.
When switching on the unit, the Visualizer runs the power-on preset.