WolfVision VZ-C32 User Manual - Handbuch (Seite 20)

WARNING:
To clean the mirror, the unit has to be opened!
Opening the unit is reserved for WolfVision or authorized service personnel!
The unit might be in need of adjustment after opening.
IMPORTANT
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Glass:
Clean the glass by gently wiping it with a soft, lint free cloth (do not use a paper
tissue!). Clean by breathing on the glass to create moisture then wipe with lint-
free cloth (If not clean, use special optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and anti-reflex coating!
Please note that dust on the mirrors (#1, #2) inside the unit and the glass has only little
effect on the picture quality (as it is out of the focal range).
18
If you want to work with more than one Visualizer in the same room, the units should be set
to different infrared codes, in order to control them all individually.
To change the IR code, enter the "Misc. Settings" and set the "IR
Code" to A, B, C or D (code A is default). To change the IR code on the remote control,
simultaneously press PRESET 1, PRESET 2
and ZOOM TELE
ress PRESET 1, PRESET 2
and ZOOM WIDE
on-screen menu, go to
(#27) (#25). Each time this
key combination is used, the code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
.
The LED shows the selected code (it flashes one time for code A, two times for code B,
three times for code C and four times for code D).
Please note that an infrared remote control can only be used up to a
certain distance from the unit. Objects situated between the Visualizer
and the infrared remote control, and weak batteries, interfere with reception.
If the Visualizer can only be controlled from a close distance, or if it
cannot be controlled at all with the infrared remote control, you may
have to change the batteries.
Open the cover on the back of the remote control and replace the two
1.5 V AA batteries with new ones.
Check the polarity of the batteries!
Recycle the batteries!
Infrared Remote Control
Different IR Codes
back (open)
-
+
-
+
X X