6 tank empty indicator, 7 tank full indicator, 8 emptying the water tank – Electrolux EOC6851BAX Benutzerhandbuch

Seite 13: 9 heat-up indicator, 10 fast heat up indicator, 11 residual heat, 12 energy saving

Advertising
background image

6.6 Tank Empty indicator

The display shows Water required and an
acoustic signal sounds when the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".

6.7 Tank Full indicator

When the display shows Water tank full ,
you can use the steam cooking.
An acoustic signal sounds when the tank
is full.

If you put too much water into
the tank, the safety outlet
moves the excess water to the
bottom of the oven.
Remove the water with a sponge
or cloth.

6.8 Emptying the water tank

Make sure that the appliance is
cool before you start to empty the
water tank.

1.

Prepare the draining pipe (C), inclu-
ded in the same package with the
user manual. Put the connector (B)
onto one of the ends of the draining
pipe.

2.

Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).

3.

Open the oven door and put the con-
nector (B) into the outlet valve (A).

4.

Push the connector again and again
when you empty the water tank.

B
C

A

5.

Remove the connector from the valve
when the water stops flowing.

WARNING!
Do not use the drained water to fill
the water tank again.

The tank can have some water
when the display shows Water re-
quired . Wait until the water flow
from the water outlet valve stops.

6.9 Heat-up indicator

When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.

6.10 Fast Heat Up indicator

This function decreases the heat-up time.
To activate the function, hold for 3 sec-
onds. You will see the heat-up indicator
alternates.

6.11 Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.

6.12 Energy saving

The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:

Residual heat:

– When the heating function or pro-

gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).

– When the appliance is off, you can

use the heat to keep food warm. The
display shows the remaining temper-
ature.

Cooking with the lamp off - Touch

and hold for 3 seconds to deactivate
the lamp during cooking.

• When you use the Moist Fan Baking

function, the lamp deactivates after 30

ENGLISH

13

Advertising