Electrolux EOC6851BAX - Handbuch (Seite 41)

13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not heat up. The clock is not set. Set the clock.
The appliance does
not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The appliance does
not heat up. The Child Lock is activated. Refer to "Deactivating the
Child Lock".
The appliance does
not heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
There is water inside
the appliance. There is too much water in
the tank. Deactivate the appliance
and remove the water with a
cloth or sponge.
The steam cooking
does not operate. There is no water in the
tank. Fill the water tank.
The steam cooking
does not operate. Lime obstructs the hole. Check the steam inlet open-
ing. Remove the lime.
It takes more than
three minutes to
empty the water
tank or the water
leaks from the
steam inlet opening. There are lime deposits in
the appliance. Check the water tank. Refer
to “Cleaning the water
tank”.
Steam and conden-
sation settle on the
food and in the ap-
pliance. You left the dish in the appli-
ance for too long. Do not keep the dishes in
the appliance for longer
than 15 — 20 minutes after
the cooking ends.
The display shows
F111. You did not correctly install
the CT Sensor into the
socket. Put the plug of core temper-
ature sensor as far as possi-
ble into the socket.
The lamp does not
operate. The lamp is defective. Replace the lamp.
ENGLISH 41