JUMO 60.8425 Contact dial thermometer with inductive contact Operating Manual - Handbuch (Seite 19)

2.3 Assembly of the terminal box
6-pole with earth terminal, conductor cross-section up to 2.5 mm
2
, suitable for
cable diameters 6.5 to 13 mm.
2.4 Mounting
H
The enclosure protection specified will only be achieved if the cable/terminal
box is mounted correctly.
0 ( 1 ) Cover screw
(captive)
0 ( 2 ) Cover
0 ( 3 ) Funnel-shaped
guide for
adjustment key
0 ( 4 ) Sealing ring
0 ( 5 ) Screw-in gland
0 ( 6 ) Pressure washer
0 ( 7 ) Grooved ring
0 ( 8 ) Clamping cage
0 ( 9 ) Middle section
( 10 ) Sealing ring
( 11 ) Bottom section
( 12 ) Shaped seal
Caution
❏ Do not expose dial thermometers directly to corrosive media. Take the
protection rating into account when installing.
❏ If the thermometer is subject to strong shock and vibration, this will impair
the function and life of the instrument. The installation site should therefore,
as far as possible, be free from vibration.
2 Installation
7