JUMO 707020 dTRANS T02 PCP - Four-Wire Transmitter Operating Manual - Handbuch (Seite 44)

20
6 PC setup program
Operation on the transmitter permits the alteration of only a few pa-
rameters. Using the PC setup program, which is available as an ex-
tra code, all parameters of the transmitter can be conveniently al-
tered. Through the setup interface, the transmitter and the PC are
connected to each other via the “PC interface”.
Configurable parameters
- TAG number (10 characters)
- analog input (sensor type)
- connection circuit (2-/3-/4 wire)
- external or constant cold junction
- customized linearization
- range limits (start and end)
- output signal current/voltage/frequency rising/falling
- digital filter
- response to probe break/short-circuit
- recalibration/fine calibration
- instrument calibration
- limit value/differential of limit comparators
- file-info text
Additional benefits of the PC setup program
- manage several different settings
- one setting for a number of transmitters
- print out setting for documentation
- operation can be switched to GMA standard
A
The frequency output will not be operated as long as the
setup plug remains plugged in.