7 technical data, 1 technical data - electrical ratings, 3 technical data - electrical ratings (sinewave) – Baumer MQR3000F Benutzerhandbuch
Seite 28: Technical data, Technical data - electrical ratings, Technical data - electrical ratings (square-wave), Technical data - electrical ratings (sinewave)
25
Baumer_MQR3000F_II_DE-EN (14A4)
MB233 - 11111230
7
Technical data
7
Technical data
7.1
Technical data - electrical ratings
• Voltage supply:
4.75...30 VDC
• Consumption w/o load:
≤300 mA (24 VDC)
• Output signals:
SSI data (linedriver RS485)
• Position resolution:
0...20 bit singleturn
• Speed resolution:
≤18 bit (±20...±2000 rpm)
• Code:
Gray or binary
• Code sequence:
Positiv at CW
• Input signals:
SSI clock, set zero, counting direction
• Additional output signals:
Square-wave HTL or TTL/RS422, SinCos
• Status indicator:
Color-LED, «System OK» output
• Interference immunity:
EN 61000-6-2:2005
• Emitted interference:
EN 61000-6-3:2007/A1:2011
• Approval:
CE
7.2
Technical data - electrical ratings (square-wave)
• Pulses per revolution:
1024...4096 (As ordered)
• Phase shift:
90° ±2°
• Scan ratio:
45...55%
• Output frequency:
≤500 kHz (HTL)
≤2 MHz (TTL)
• Output signals:
A+, A-, B+, B-
• Output stages:
HTL
TTL/RS422
(As ordered)
7.3
Technical data - electrical ratings (sinewave)
• Sinewave cycles per turn:
1024...4096 (As ordered)
• Phase shift:
90° ±2°
• Output frequency:
≤500 kHz
• Output signals:
A+, A-, B+, B-
• Output stage:
SinCos 1 Vpp