Chariot Carriers 2003 - Handbuch (Seite 15)

15
Parts supplied:
Baby seat, telescopic tube, 2 countersunk bolts with nylok
nuts, 2 machine bolts with nylok nuts, 2 D rings
Fitting Instructions Chariot Baby Seat
Congratulations on buying the Chariot Baby Seat, which can be permanently
fitted to all Chariot trailer models from 2003 onwards.
Parts supplied:
Safety note!
The Chariot Baby Seat is suitable for carrying babies aged between one and ten months of age
safely. The baby may not exceed 75cm in length. The maximum weight of the child should not
exceed 10kg.
Note:
For fitting the baby seat to a
2 seater trailer, only the
telescopic tube and the two
countersunk bolts with their
nuts are needed, and for fitting
to a single seater trailer, only
the D rings and the machine
bolts with their nuts are
needed.
Note:
The baby seat is only approved for Chariot CTS models from the 2003 models onwards.
These models have the following distinguishing features:
• Drilled holes on the front undersides of the upper side frame tubes
• All seat belts are adjustable in length
• Seat belts are securely attached to the frame
The baby seat is not designed to be fitted to older models.
1. Fitting the Baby Seat to a Two Seater Chariot CTS
1.1 Fitting the Telescopic Tube
When fitting the telescopic tube it helps to fold up the basic unit in order to slacken off the fabric
cover.
On the Corsaire, Corsaire XL, Cabriolet, Captain, Captain XL and Comfort models the belt that holds
both fabric sides together can also be slackened off.
To do this, first move the clasp to the middle and then slacken off the belt at the fastener.
Suitable trailers can be folded with the baby seat fitted in situ.