Chariot Carriers 2003 Benutzerhandbuch

Seite 23

Advertising
background image

2. Fitting the Baby Seat to a Single Seater Chariot CTS

2.1 Fitting the D-rings

When fitting the D rings it helps to fold up the basic unit so as to slacken off the fabric cover.

Location of the drilled holes at
the front in the side frame tube.

To attach the D rings the
machine bolts and nylok nuts
are needed.

Insert the bolt with the D ring
through the hole in the side
frame tube so that the
D ring lies on top on the tube.

Screw on the nylok nut and
tighten it using a Philips
crosshead screwdriver and an
11mm spanner.

Fit the second D ring on the other side in the same way.

2.2 Securing the Baby Seat

2.2.1 Preparing the safety belts

See Section 1.2

2.2.2 Securing the baby seat to the trailer seat

Connect the fastex buckles of the baby seat with their counterparts on the lap belt.

The baby seat is properly fitted if the side of the flap for the crotch harness padding that is attached
to the baby seat points towards the front of the trailer. (See illustrations in Section 1.2.2.)

Experience has shown that it helps if the overall belt length adjustment is made to about 15 or 16cm.

23

Advertising