AMT Datasouth Fastmark M4 - Handbuch (Seite 25)

~ 25 ~
Connecting the printer interface
The printer must establish communication with a host terminal which sends the
data to be printed. There are three ways to connect for Fastmark M4 series
printer.
 By a USB cable between the printer and its host terminal
 By a Bluetooth short-range radio
 By a Wireless LAN per 802.1 b/g (Optional)
Cable communications
1.
Open the interface cover and connect the printer to the computer/smart
phone (host terminal) with USB cable. (USB to USB or USB to RS-232)
Wireless communication with Bluetooth
1.
Turn on the printer.
2.
Open the Bluetooth device for host terminal to scan for printer’s
Bluetooth device
3.
Connect the Bluetooth devices. The Bluetooth LED will turn on blue (the
Bluetooth icon will be shown for LCD panel) if devices have been paired.
USB connector (Printer)
USB/RS-232 connector (PC)
Printer Bluetooth default
Address You can find the printer address by printing the configuration
(self-test) page.
Name BT-SPP (Use DiagTool to change NAME)
PIN 0000 (Use DiagTool to change PIN)