AMT Datasouth Fastmark M4 - Handbuch (Seite 47)

~ 47 ~
Media
Power Up
Printer Option Description
No
Motion
Feed Printer will advance one label.
Calibration Printer will calibrate the sensor levels,
determine length and feed label.
Length Printer determines length feeds label.
No Motion Printer will not move media.
This option is used to set the action of the media when you
turn on the printer:
Head Close
Printer Option Description
No
Motion
Feed Printer will advance one label.
Calibration Printer will calibrate the sensor levels,
determine length and feed label.
Length Printer determines length feeds label.
No Motion Printer will not move media.
This option is used to set the action of the media when you
close the print head:
Label Top
This option is used to adjust print position vertically on
the label. The range is -120 to +120 dots.
0
Left Position
This option is used to adjust print position horizontally on
the label. The range is -9999 to +9999 dots.
+0000
NOTE:
If printing from enclosed software/driver, the
software/driver will send out the commands, which
will overwrite the settings set from the panel.