Guntermann & Drunck DVISplitter2-DL - Handbuch (Seite 18)

Selecting DDC information
5 · G&D DVISplitter2-DL
Selecting DDC information
The video signal can only be displayed at the monitors of the DVISplitter2-DL if
video signal and DDC information are transmitted.
Transparent transmission of DDC information
In the default settings (switch position Def. ), the DVISplitter2-DL uses the DVI-D DL Out 1
interface to read out the DDC information of the connected monitor.
The DVI-D DL CPU interface is used to transmit the read-out DDC information to the
video source.
If the DDC information cannot be transmitted over the entire distance, for example
due to a weak signal, the monitor displays no image or you cannot adjust the pre-
ferred resolution.
In this case, you can enable one of the preset DDC profiles or store the monitor’s
DDC information in the DVISplitter2-DL.
Preset DDC profiles
You can choose a certain DDC profile if the monitor does not display an image or if
you cannot adjust a certain resolution.
The following table lists the different switch positions and the respective DDC pro-
files or functions:
ADVICE: You can also use the Learn mode to read out and save the monitor’s DDC
information. If you enable the User mode, the DVISplitter2-DL transmits the infor-
mation to the video source.