Guntermann & Drunck OperatorPanel - Handbuch (Seite 27)

Setup menu
8 · G&D OperatorPanel
Changing the switching priority
If you switch the channel at the connected device (z. B. DL-MUX4, DVIMUX),
after three seconds, the OperatorPanel automatically switches back to the channel defi-
ned in the OperatorPanel (default).
By selecting the option Follower under Switching Priority , the OperatorPanel does not over-
write this channel and follows the setting of the other device.
How to change the switching priority:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the Arrow or Arrow keys to select Switching Priority .
4. Press Space to select between the following options:
5. Press S to save your settings.
6. Press Q to return to the main menu.
Master If you switch the channel at the connected device, after
three seconds, the OperatorPanel automatically switches back
to the channel defined in the OperatorPanel (default).
Follower If you switch the channel at the connected device, the Ope-
ratorPanel does not overwrite this channel and follows the
setting of the other device.