Operation – Guntermann & Drunck OperatorPanel Benutzerhandbuch

Seite 29

Advertising

Operation

10 · G&D OperatorPanel

Operation

In the default settings, pressing and holding the

Enable

button prevents you from

switching channels by accident.

How to switch to a channel of the connected KVM switch:

1. Only if »Safety Switching« is enabled (default):

Press and hold the

Enable

button.

2. Press the

Select

button of the channel you want to switch to.

ADVICE:

You can disable the Safety Switching function (see page 7) if you only

want to use the

Select

button to switch between channels.

NOTE:

Every three seconds, the device checks the active channel.

If you change the channel in the meantime, the device switches to the channel

that is selected at the

OperatorPanel

To prevent automatic switching, you can change the

Switching Priority

(see page 8).

Advertising