EverFocus EKR-KB1 - Handbuch (Seite 66)

Page 64 MNNCEKRKB1_0439
6.5 Elbex Dom e
6.5.1 Reference m aterial and documents
Dome Elbex EX8389
EMB Camera (R0.70), Camera ID Code Manual for Digital Camera Control
ECCCamera (R0.70), Command Manual for Digital Camera Control, Dec. 18, 2002
6.5.2 Notes on p rotocol
Elbex protocol was designed to control a range of domes, whose features are dissimilar. It is possible that each
command here described is used either in the whole dome range or is peculiar of a single model.
Please read the dome manual to get the whole list of available functions.
Access level is fixed to 3 (complete control).
6.5.3 Connection
6.5.3.1 Cable
White
Yellow
RS485A
RS485B
RS422+
RS422-
Elbex EX8389
6.5.3.2 Dome setting s
Dome ID-number must be set according to the respective installation manual. It is not possible to change
remotely the ID-number.
6.5.3.3 Keyboard set tings
During Keyboard setup, submenu  , must be suitably set:




Baudrate is fixed.
6.5.4 Dome setup
The dome can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
 ).
6.5.5 Note on do me control
The protocol used by Elbex domes is particularly time-demanding and it is not possible to control more than one
dome on a communication line at a given time. The ideal configuration has a single control keyboard and a
number of domes on each communication line.