EverFocus EKR-KB1 - Handbuch (Seite 77)

Page 75 MNNCEKRKB1_0439
6.8 Eneo Pan & Tilt
6.8.1 Materials a nd reference documents
Eneo Pan & Tilt VPT-42/RS1.
Protocol documents PC COMMAND-v3.0VT e VT-ASCII.
6.8.2 Connection s
6.8.2.1 Cable
White
Yellow
RS485A
RS485B
RS485 RX+/
TTY 20 mA
RS485 RX-/
TTY 20 mA
Eneo VPT-42/RS1
6.8.2.2 Configuring t he pan & tilt
The number of the pan & tilt must be configured correctly. See the corresponding manual.
6.8.2.3 Configuring t he keyboard
When configuring the keyboard, the  submenu should be set up as follows:




The baud rate should correspond to the one selected for the
pan & tilt.
6.8.3 Configuring the pan & tilt
Settings for all pan & tilt parameters requiring configuration are made by pressing a combination of keys or
byinserting a special code.
For all pan & tilt setup operations the keyboard should be enabled for TELEMETRY SETUP
(
 menu ).
The menu for pan & tilt setup is entered by pressing  :






The items in the setup menu are described below.
Individual settings can be recalled one at a time using
combinations of dedicated keys:
 autopan setup

standard patrol setup
 random patrol setup
 home position setup

preset speed setup.