EverFocus EKR-KB1 Benutzerhandbuch
Seite 73
Page 71
MNNCEKRKB1_0439
6.6.3.1 OSM Setup
Connect the dome directly to the keyboard and connect a monitor to the dome video outlet.
The EKR-KB1 keyboard enters special mode while the dome is being set up. When
is pressed for the first
time, the keyboard is reset to normal operation.
starts dome setup.
The dome shows the menu on video; the keyboard shows the mode change on the display:
end setup
enter submenu
Joystick
: shifts the cursor within the menus
Joystick
: changes the value shown by the cursor.
When dome movement is required in OSM mode, the
key should be held down while the joystick is being
moved
.
Activation of Zoom Tele and Zoom Wide, when required, is obtained by rotating the joystick
.
6.6.3.2 Direct setup
Some parameters can be set up by pressing the keys or inserting a special code:
Line lock phase:
increase,
decrease.
Automatic autoflip:
enable,
disable
Zoom speed:
(1÷4); slow zoom (X = 1), fast zoom (X = 4)
Pan speed proportional to thezoom:
enabled,
disabled
Digital zoom:
disabledd,
(2÷8) enabled 2x÷8x
Focus speed:
(1÷4); focus slow (X = 1), focus fast (X = 4)
Autofocus:
on/off (toggle),
off
Autoiris
: on