Eppendorf 5810 R Centrifuge - Handbuch (Seite 48)

Centrifuge 5804/5804 R/5810/5810 R — Operating manual
48
4 Installation
4 Installation
4.1 Selecting the location
Select the location for the device according to the following criteria:
• Suitable power connection as per the name plate (230 V/120 V/100 V).
• Stable, horizontal and resonance-free lab bench. Weight of the device: 55 kg (5804) or 80 kg
(5804 R), 68 kg (5810), 99 kg (5810 R).
• A well ventilated environment which is protected from direct sunlight to prevent the device
from heating up more.
4.2 Preparing installation
Perform the following steps in the sequence described.
1. Open the box.
2. Remove the covering cardboard.
3. Remove the accessories.
4. Lift the device by the underside in the vicinity of the device feet and place it directly on a
suitable lab bench.
NOTICE!
If an error occurs, the objects in the immediate proximity of the device will be damaged.
 In accordance with recommendations in EN 61010-2-020, leave a safety clearance of 30 cm
around the device during operation.
 Please remove all materials and objects from this area.
NOTICE!
Damage from overheating.
 Do not install the device near to any heat sources (e.g., heating, drying cabinet).
 Do not expose the device to direct sunlight.
 Ensure unobstructed air circulation. Keep free a clearance of at least 30 cm around all
ventilation grilles.
NOTICE!
Radio interference.
This device is a category A product in accordance with EN 55011. There may be disturbance to
radio reception in residential areas.
 Ensure that appropriate preventive measures are taken.
CAUTION!
Bodily injury due to lifting and carrying heavy loads
The device is heavy. Lifting and carrying the device can lead to back injuries.
 The device must be transported by least two people.
 Use a transport aid (e.g., dolly) to transport the device longer distances.
EN
Operating manual