Eppendorf 5810 R Centrifuge - Handbuch (Seite 4)

Abb. 2: Control panel of the Centrifuge 5804/5810 and theCentrifuge 5804 R/5810 R.
Control panel of the Centrifuge 5804/5810 and theCentrifuge 5804 R/5810 R.
Abb. 3: Display of the Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R
Display of the Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R
1 Short spin centrifugation 2 Display
3 Status At set rpm function 4 Indicate speed (rpm), g-force (rcf) and radius
setting .
5 Symbol for acceleration and braking 6 Set parameters and values
7 Release centrifuge lid 8 Start or stop centrifugation
9 Adjust centrifugation time 10 Set centrifugation speed
11 Select or save program 12 Standby
13 Set temperature (only 5804 R/5810 R) 14 Start temperature control run FastTemp
(only 5804 R/5810 R)
1 Program number 2 Symbol for g-force (rcf)
3 g-force (rcf)/rotational speed (rpm) 4 Symbol flashes when rotor is in motion
5 Symbol for acceleration and braking 6 Centrifugation time
7 Temperature (only 5804 R/5810 R)
Number of
buckets
∅ of
buckets (mm)
Fixed-angle
rotor
Aerosol-tight
version
Angle of
bores
Number of
bores
∅ of
bores (mm)
Swing-bucket
rotor
81
Number of
buckets
Fixed-angle
rotor
Aerosol-tight
version
Angle of
bores
Number of
bores
∅ of
bores (mm)
∅ of
buckets (mm)
Swing-bucket
rotor