5 operation, 1 overview of operating controls, Operating manual – Eppendorf 5810 R Centrifuge Benutzerhandbuch
Seite 50
Centrifuge 5804/5804 R/5810/5810 R — Operating manual
50
5
Operation
5
Operation
5.1
Overview of operating controls
Before using the centrifuge for the first time, familiarize yourself with the operating controls and
the display.
The depiction of the operator panel and the device display can be found on the front fold-out
page (s. Fig. 2 and Fig. 3).
Abb. 2:
Control panel of the Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R.
Fig.
2:
Control panel of the Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R.
Abb. 3:
Display of Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R
Fig.
3:
Display of Centrifuge 5804/5810 and the Centrifuge 5804 R/5810 R
The display of the centrifugation parameters changes depending upon the condition of the
device:
•
Rotor stop: display of set values.
•
Centrifugation: display of actual values.
When you press the temp, time or speed keys during centrifugation, the respective set value is
displayed for 2.5 seconds.
Please also read the precise description of the individual functions (see p. 60).
1 Short spin centrifugation
2 Display
3 Status At set rpm function
: Start of run time when reaching 95% of the
preset g-force (rcf) or speed (rpm).
: Start of run
time immediately.
4 Indicate speed (rpm), g-force (rcf) and radius
setting .
5 Symbol for acceleration and braking
6 Set parameters and values.
7 Release centrifuge lid.
8 Start or stop centrifugation.
9 Adjust centrifugation time.
10 Set centrifugation speed.
11 Select or save program.
12 Standby
13 Only 5804 R/5810 R: Set the temperature.
14 Only 5804 R/5810 R: Start temperature control run
FastTemp.
1 Program number
2 Symbol for g-force (rcf)
3 g-force (rcf)/rotational speed (rpm)
4 Symbol flashes during centrifugation
5 Symbol for acceleration and braking
6 Centrifugation time
7 Only 5804 R/5810 R: Temperature
EN
Operating manual