2 application programs with opc interface, Application programs with opc interface, Driveserver – Lenze DriveServer Erste Schritte Benutzerhandbuch
Seite 61
DriveServer
L
59
DriveServer DE/EN 1.1
If you select a parameter or a group of parameters from the name area, the current parameter data
will be indicated on the right. With same parameters these data can be changed.
Warning!
Since you have an online connection with the controller every change will show immediate effect.
Only make changes when you are sure that they will not lead to any damage of machinery or persons!
Entries under “Code” are indicated in different colours depending on their meaning.
Green
The parameter data have not been read from the file yet.
Light grey
The parameter data can be read only
Black
The parameter data can be read and changed.
•
If you double click a parameter value, a dialog box for changing the current parameter value
will appear.
Red:
The parameter data cannot be read from the drive (e.g. transfer error).
6.2.2
Application programs with OPC interface
Every PC which supports the OPC interface can access the name area of the DriveServer and thus the
drive parameter by using the OPC browse function.
For instance, a visualisation program can be used. The configuration of the visualisation program only
requires the assignment of the display elements of the visualisation and the corresponding parameters
in the name area.
For further information please see the documentation for the program.
Show/Hide Bookmarks