7 driveserver architectures (examples), 1 access via a lan (local area network), Access via a lan (local area network) – Lenze DriveServer Erste Schritte Benutzerhandbuch
Seite 62: 7driveserver architectures (examples), Driveserver
DriveServer
L
60
DriveServer DE/EN 1.1
7
DriveServer architectures (examples)
In the following you will find a short description of architectures implemented with the DriveServer.
Since there are so many configurations possible, the following examples can only show some typical
DriveServer architectures.
•
Access via a LAN (Local Area Network)
•
Transparent access using a PLC
•
Access to different fieldbus systems via a LAN
7.1
Access via a LAN (Local Area Network)
The following figure shows a system architecture which allows access to a drive network in a LAN
(e.g. Ethernet).
LAN (Ethernet)
Fieldbus (CANopen)
•
The fieldbus (e. g. CANopen) is connected to an industrial PC.
•
The corresponding bus server and the DriveServer are installed on this industrial PC.
•
The industrial Pc is also connected to the local Ethernet network.
•
Diagnostics/parameter setting for the drives can be made via all PCs connected to the Ethernet
network. The only condition is that an OPC client is installed (e. g. the parameter setting
program Global Drive Control with OPC interface).
Show/Hide Bookmarks