Eneo VKC-13100IR12Z - Handbuch (Seite 41)

4
DAY&NIGHT
An infrared (IR) cut-filter can be disengaged
from the image path for increased sensitivity
in low light environment. The ICR will auto-
matically engage depending on the ambient
light, allowing the camera to be effective in
day/night environments.
• Auto Mode
It automatically switches the settings needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is automatically disabled and the infrared
sensitivity is increased. With a level of brightness, the IR Cut Filter is automatically enabled.
• Ext-In Mode
It switches to Day mode when the input from D&N-IN Port is High and switches to Night
mode when it is low.
Select Day&Night
• Mode: Select Day&Night mode
DAY / NIGHT / AUTO / EXT
• Delay: Adjust the working time of the filter when Day&Night operated.
5/0/5/0/5/30/35/40/45/50/55/60 sec
• BURST: When you select BW, you can burst off/on
OFF/ON
6.2.3. WHITE BALANCE
Auto Mode
This mode computes the white balance value output using colour information from the entire screen.
It outputs the proper value using the colour temperature.