Auriol 2-LD3372-2 - Handbuch (Seite 5)

- 7 -
Wristwatch
Introduction
Congratulations on the purchase of your new wristwatch. You have chosen a high
quality product. The instruction manual is part of the product- it contains important
information about safety, use and disposal. Read the manual with all usage and
safety notes before using the watch. Only use the watch in the intended way and
for the intended applications.
If the watch is given to someone else, include all documentation with the watch.
Intended use
This watch is intended for time display and the described additional features. Any
other use or modification of the electronic appliance does not comply with the
intended uses. The manufacturer is not liable for damages caused by improper use
or misuse. The device is not intended for commercial use.
Important information
• Your new automatic watch contains a complex mechanical movement
which provides several features without the use of electronics.
• If the watch is worn daily, it is not necessary to manually wind it.
Winding the watch daily will however increase the time keeping
accuracy.
A few turns of the winder will suffice.
• Please note that slight time keeping inaccuracies are to be expected
and that this does not mean that the watch is defective.
• Temperature fluctuations can increase the time keeping inaccuracies.
• Because of the sensitivity of the movement, it must be protected from
shock and magnetic fields.
• We recommend that you have your watch checked by a watch expert
once a year to ensure its longevity.
Cleaning instructions
Clean the product with a soft, dry and lint-free cloth. A glasses cleaning cloth is
ideal.
- 8 -
Display elements and controls
A hour hand D winder in setting position
B second hand E
winder in initial position
(winding)
C minute hand
Setup
While wearing the watch, the normal motions of your arm will wind the movement.
When using the watch for the first time or after it has not been worn for a while, the
watch must be wound manually. Ensure that the winder is in the initial position (E)
and turn the winder 10-15 turns in the clockwise direction. Now continue with the
settings.
Time setting
Pull the winder into the setting position for the time. Set the time by turning the
winder. Press the winder back to the initial position.
Water resistance
Water resistant up to 5 bar. The bar value specifies the atmospheric overpressure
which is applied during testing (DIN 8310).
digi-tech gmbh warranty
This wristwatch includes a 3 year warranty starting on the day of purchase. In case
of defects of this wristwatch you have, by law, certain rights regarding the vendor
of the watch. These rights are not changed by the warranty which is described in
the following paragraphs.