Burkert Type 8643 - Handbuch (Seite 11)

40
PackaGinG, TransPorT 11.
and sToraGe
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
During transportation protect the device against wet •
and dirt in shock-resistant packaging.
Avoid exceeding or dropping below the allowable
•
storage temperature.
Incorrect storage may damage the device.
Store the device in a dry and dust-free location! •
Storage temperature: • -40 … +55 °C.
decommissioning 11.1.
Switch off the Power I/O Box Type 8643 as follows:
Depressurise the system.
→
Switch off the power supply.
→
Remove the Power I/O Box Type 8643.
→
Store the Power I/O Box Type 8643 in its original
→
packaging or a suitable protective packaging.
english 41
restarting 11.2.
Switch on the Power I/O Box Type 8643 again as follows:
Unpack the Power I/O Box Type 8643 and allow it to reach
→
room temperature before switching on again.
Then proceed as described in chapter
→
8.installation.
english
42
disPosal 12.
Dispose of the device and packaging in an environmentally
→
friendly manner.
note!
Damage to the environment caused by device com-
ponents contaminated with media.
Observe applicable regulations on disposal and the •
environment.
Observe national waste disposal regulations.
english
Type 8643