Burkert Type 8643 - Handbuch (Seite 12)

44
Parameter Description
SP_D Set-point value
Bit 0 in the value specifies the valve
→
position. The transferred status must
be a “good” status, e.g. 0x80.
english 45
PAckAGinG And 11.
TrAnsPorT
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
During transportation protect the device against wet •
and dirt in shock-resistant packaging.
Avoid exceeding or dropping below the allowable
•
storage temperature.
english
46
sTorAGe 12.
note!
Incorrect storage may damage the device.
Store the device in a dry and dust-free location! •
Storage temperature. -20 ... +60 °C. •
english 47
disPosAl 13.
Dispose of the device and packaging in an environmentally
→
friendly manner.
note!
Damage to the environment caused by device com-
ponents contaminated with media.
Observe applicable regulations on disposal and the •
environment.
Observe national waste disposal regulations.
english
Type 8643 PA