WIKA CEP3000 - Handbuch (Seite 17)

17 WIKA operating instructions, model CEP3000
14036068.02 08/2012 GB/D
GB
6. Commissioning, operation
6.2.2 Simulating a thermocouple
A thermocouple cable has to be used in order to enable high accuracy calibration.
For maximum accuracy, wait for 10 minutes after switching on.
Device to be
checked
Device to be
checked
Use the wires of the
thermocouple so that the
calibration is as accurate
as possible.
Figure 1: Simulating resistances
Figure 2: Simulating a thermocouple