Gb 1. general information 1. general information – WIKA CEP3000 Benutzerhandbuch
Seite 4
4
WIKA operating instructions, model CEP3000
14036068.02 08/2012 GB/D
GB
1. General information
1. General information
■
The hand-held temperature calibrator model CEP3000 described in the operating
instructions has been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instru-
ment. Working safely requires that all safety instructions and work instructions are
observed.
■
Observe the relevant local accident prevention regulations and general safety regula-
tions for the instrument’s range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The manufacturer’s liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with
international standards.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- Relevant data sheet:
CT 82.01
- Application consultant:
Tel.:
(+49) 9372/132-9986
Fax:
(+49) 9372/132-8767
E-mail: [email protected]