JUMO 707020 dTRANS T02Ex - Four-Wire Transmitter Operating Manual - Handbuch (Seite 70)

26
10 PC setup program
Operation on the transmitter permits the alteration of only a few
parameters. Using the PC setup program, which is available as an
extra, all transmitter parameters can easily be altered. The
transmitter and the PC are linked with one another through the “PC
interface”, via the setup interface.
Configurable parameters:
- TAG number (10 characters)
- analog input (sensor type)
- connection circuit (2-/3-/4-wire circuit)
- external or constant cold junction
- custom linearization
- range limits (start and end)
- output signal current/voltage/frequency rising/falling
- digital filter
- response to probe break/short-circuit
- recalibration/fine calibration
- instrument calibration
- limit/differential of limit comparators
- file-info text
Additional benefits of the PC setup program
- manage several different settings
- one setting for several transmitters
- print out setting for documentation
- operation can be switched to GMA standard