Lenze DriveServer Erste Schritte - Handbuch (Seite 51)

DriveServer
L
49 DriveServer DE/EN 1.1
5.2.2 Selection and configuration of the COM interface
1. Click the button Add new communication PC port to add the serial interface to which the
drives are connected, to the configuration.
2. Enter Name (freely selectable) and COM number of the interface used and press OK.
The added communication port is indicated as configuration entry in the LECOM configuration tool.
3. Use the list field Baud rate to select the baud rate for the drives connected.
– Lenze controllers are default set to 9600 baud.
Show/Hide Bookmarks