Lenze DriveServer Erste Schritte - Handbuch (Seite 54)

DriveServer
L
52 DriveServer DE/EN 1.1
5.4 DriveServer configuration
Since all fieldbus specific settings are saved directly in the corresponding bus server, the DriveServer
must only get the information which bus server is to be used.
The DriveServers is configured via the program “DriveServer configuration tool”:
• Select Programs W Lenze W DriveServer W DriveServer configuration tool.
5.4.1 Operator interface of the DriveServer configuration tool
The DriveServer configuration tool is subdivided into two sections:
• The left side is reserved for the name indicated in form of a tree, similar to directories in the
Microsoft Explorer.
• The right side shows the Parameter data.
List of symbols used for the classification of elements used for the names:
Symbol Element/meaning
OPC server (DriveServer)
The DriveServer represents the highest level in the name area.
Online
This element includes a list of all bus servers and drives assigned to DriveServer.
Offline
Whereas the element
Online shows all physically connected drives, this element also allows to
configure so-called “Offline drives” for simulation purposes.
• Offline drives are also listed in the name area of the DriveServer but do not require a bus server.
• How to add an offline drive:
– Click the element Offline in the name area to get a list of all controllers known to the
DriveServer.
– Select the controller wanted and press OK to add this controller to the list of offline drives.
Show/Hide Bookmarks