Retsch AS 450 control - Handbuch (Seite 22)

Operating the machine
22
Screw the threaded rods (F) into the sieve plate (G) and secure them to the flat
area (F1).
NOTICE
The clamping force to secure the sieve rods is approx. 30Nm.
• Place the selected sieve stack centrally on the sieve plate.
• Place the clamping cover (E) over the threaded rods on the top sieve.
• Screw both cross braces (D) onto the support thread up to the clamping
cover.
• Tighten the cross braces using both hands.
We recommend use of talcum if the collecting pan sticks to the smooth surface of
the sieve support when removing the sieve stack.
Pos : 7. 15 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Sc h nells pannvorricht ung - Verwendung @ 2\ mod_1268900264318_9.doc @ 19010 @ @ 1
5.7 Using the quick-action clamping device
Pos : 7. 16 /00010 Bedi enungsanleit ung en Kapitels ammlungen/ AS450_c ontrol/ 0007 Bedienung/ AS450 M o dul Sc hnells pannvorric htung @ 2\ mod_1268900393708_9.doc @ 19017 @ @ 1
A quick clamp device is available as accessory for the AS450.
Fig. 10: Inserting and using the quick clamp device
5.7.1 Preparation
• Place the sieve stack on the AS450.
• Place the sieve cover on the sieve stack.
• Twist the sieve cover clockwise until both openings are adjacent to the sieve
rods.