Weidmuller AMS400A - Universal interface device - Handbuch (Seite 33)


Display
The display will normally show the output level in engineering units. For
error mode handover it shows the difference between the automatic
level and the actual output level. You can also check on the automatic
level when in manual mode by pressing the AUTO key.
Configurationspecificsettings
Setting Display Description Е м ENT
Manual Ramp
Rate
rr1=
10.0
Introduces the manual ramp rate
Rate at which output can be manually adjusted -
Dec
-
Inc
Next
Accept
Handover Mode
rAnP
HErr
Ramp mode handover method
Error Mode handover
Toggle Accept
rr2=
1.0
Introduces handover ramp rate (Ramp mode Only)
Ramp rate for handover mode, e.g., 1.0 % -
Dec
-
Inc
Next
Accept
Power Up mode
SUPA
SUPn
Starts up in Automatic Mode
Starts up in Manual Mode
Toggle Accept
nSU=
50.0
Introduces starts-up output
Output at power-up (in display units) -
Dec
-
Inc
Next
Accept