Guntermann & Drunck CATVision - Handbuch (Seite 127)

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 53
7.1.3 Access as Supervisor
If you want to change the presets enter your SUPERVISOR identification in
the arrays “name” and “password”. Both can be found in the appendix 1 of the
operating instructions.
Via SUPERVISOR-Login you have unrestricted access to all configuration
levels independent from the current settings.
For the settings in Menu Config a log-in as SUPERVISOR is necessary:
Of course can a configuration right be linked to the User Login (see
chapters
6.2.3.4 – 6.2.3.6 )
Please remove the SUPERVISOR password from the operating
instructions for your own safety.
7.2 Automatic Switching
The CATVision system allows the selectable operation of the computers from
both consoles (local and remote).
In default operation at both consoles is possible.
As soon as at one of the consoles there is keyboard or mouse action
keyboard and mouse of the other station are disabled.
After a time out of approx 1 second where there is no action the system is
enabled again.
The time out between the switching can be adjusted to your needs (
see
chapter 6.2.2.7 ).
Both connected monitors show simultaneously the picture of the computer.
If the dark switching is enabled (see
chapter 7.5 ) only the monitor of the active
console is switched on.