Guntermann & Drunck MultiPower-6 - Handbuch (Seite 17)

Introduction
MultiPower-6 · 2
Introduction
The central power supply MultiPower-6 supplies up to six devices with 12 Volt. The
maximum power consumption permitted per device is 1.2A.
Use power loop cables to connect the Mini-DIN 4 sockets of up to six devices to one
of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the MultiPower-6 .
The LEDs on the front and the back panel show the device’s operating status and
the load of all active devices.
You can use the service menu to configure the device and call up different informa-
tion.
Package contents
 1 × central power supply MultiPower-6
 6 × power loop cables
 2 × power cable
 1 × USB service cable
 1 × manual
Load Service
Power
Red.
Main
Main Power Red. Power
Power Out 1
Status
12VDC/1,2A
Power Out 2
Status
12VDC/1,2A
Power Out 3
Status
12VDC/1,2A
Power Out 4
Status
12VDC/1,2A
Power Out 5
Status
12VDC/1,2A
Power Out 6
Status
12VDC/1,2A