Guntermann & Drunck MultiPower-6 - Handbuch (Seite 22)

Setup menu
7 · MultiPower-6
Configuration settings
Delay until the first »Power Out« socket is active
After you turn on the central power supply, the first Power Out becomes active after a
delay of 0.7 seconds ( Power Start Delay ).
You can decrease or increase the delay by entering values between 0.0 and 10.0 sec-
onds (standard: 0.7 seconds).
How to adjust the delay until the first »Power Out« socket is active:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press R within the terminal emulator.
4. Use the Arrow or Arrow keys to select Power Start Delay .
5. Use the Arrow or Arrow keys to decrease or increase the adjusted value.
6. Press S to save your settings.
Delay until further »Power Out« sockets are active
Following the first Power Out socket,all other sockets become successively active with a
delay of 0.1 seconds.
You can decrease or increase the delay by entering values between 0.0 and 2.0 sec-
onds (standard: 0.1 seconds).
How to adjust the delay until further sockets are enabled:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press R within the terminal emulator.
4. Use the Arrow or Arrow keys to select Power Channel Delay .
5. Use the Arrow or Arrow keys to decrease or increase the adjusted value.
6. Press S to save your settings.