Eneo HDC-2220M1080 - Handbuch (Seite 29)

9
8.7 SPECIAL FUNCTION
• DEFECT DET: Compensates for bad pixels that my occur. Occurs when the whole screen is in full black or if there
is bad pixelation and it changes the THRS values until the screen is fixed. (OFF / ON)
NOTE: If you use a DC lens what closed IRIS, you do not need to block the lens while operating DEFECT
function. In case of using a DC lens not closed and manual lens, you have to block the lens while
operating DEFECT function.
• DEFOG: Carry out defog function
OFF / ON
LEVEL: Eliminate amount of fog on display screen.
0 ~ 0
NOTE: When DEFOG is ON, ACE and WDR function can not turn on.
• SYSTEM: Select NTSC or PAL. (NTSC / PAL)
• HD FORMAT: Select Digital output 080P or 70P. (080P / 70P)
• COMM: Set up the camera ID, baud rate, protocol
ID: Select the camera ID
 ~ 55
BAUD RATE: Select serial communication speed
400 / 4800 / 9600 / 900 / 38400 / 57600 / 500bps
PROTOCOL: Select operating protocol
PELCO-D / PELCO-P / UPDATE / VISCA
APPLY: ON / SAVE
• DEFAULT: All the settings will be restored to the factory default.