Eneo HDC-2220M1080 - Handbuch (Seite 31)

3
Problem Possible Solution
Nothing appears on the screen. • Please check the power connection.
• Please check the video signal line connection.
The video image is not clear. • Please clean the lens with a clean cloth or brush.
• Please adjust that the screen is not exposed directly to a bright light.
• Please move the camera if necessary.
The screen is dark. • Please adjust the contrast feature of the monitor.
• If you have an intermediante device, set the 75/Hi-z properly, and check
the terminals.
• Please adjust the brightness level.
The MOTION DETECTION function
is not working. • Please check if „MOTION DETECTION” mode is turned on.
• Please check if the MD Sensitivity is too low.
• Please check the setting of the MD AREA.
The WDR function is not working. • Please check if the WDR Level is too low.
• Please check if the AE Mode is set to MANUAL.
The WDR doesn’t work in MANUAL Exposure mode.
Colours are not quite right. • Please check if the camera is facing directly into sunlight or fluorescent
light.
The Day&Night function
doesn ’t work. • Please check if the AGC of EXPOSURE menu is set to OFF.
• The Auto Day&Night doesn’t work in AGC OFF status.
9. Troubleshooting
If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the
problem, contact an authorized technician.