Crivit 1-LD3875 - Handbuch (Seite 7)

- 11 -
Time setting
Press and hold SET. The 12/24 hour time mode indicator will appear. Select the
preferred mode and confirm your selection by pressing SET. Now set the hours,
minutes and seconds by pressing SEL to set each value and pressing SET to
confirm each setting. Now set the year, month and day in the same way and
confirm the setting with SET. Time zone 1 and time zone 2 may be set in the same
way.
Alarm (ALARM)
Repeatedly press MODE to select alarm mode (ALARM). Press SEL to activate or
deactivate the alarm. If the alarm is activated, the alarm symbol
will appear.
Press and hold SET to enter setting mode. The hours of the alarm time will blink on
the display.
Press SEL to set the hours and confirm your setting by pressing SET. Set the minutes
in the same way.
Press any button when the alarm sounds to stop the alarm.
If no button is pressed, the alarm will sound for about 60 seconds and restart after
5 minutes.
- 12 -
Stopwatch (St-UHR/CHRONO)
Repeatedly press MODE to select the stop watch (ST-UHR/CHRONO).
Press SEL to start or stop the stop watch.
Press SET while the stopwatch is running to record a lap time (L01). Up to 99 lap
times (L99) can be recorded. VOLL/FULL will appear after reaching the maximum
number of lap time recordings.
When the stopwatch is stopped, press SET to activate the memory feature (R) and
display the best lap time (BESte/BEST LAP). Press SEL repeatedly to display the
other lap times. Press SET to return to the stopwatch.
Press and hold SEL to reset the stopwatch.
Note:
The memory feature can only be used if at least one lap time has been
recorded.
Timer (TIMER) max. 9:59:00
First, press MODE repeatedly to select timer mode (TIMER). The pre-set time of
0:3000 seconds will appear on the display.
Press and hold SET to set the timer.
The hours of the timer time will appear blinking on the display. Press SEL to set the
hours and press SET to confirm your setting. Set the minutes in the same way. Press
SEL
to start or stop the timer. After the set time has elapsed, an alarm will sound for
60 seconds. Press MODE, SEL or SET to stop the alarm.