LumaSense Technologies IS 12-TSP - Handbuch (Seite 18)

IMPAC pyrometers IS 12-TSP · IGA 12-TSP
18
10.6 Basic settings
Under pyrometer parameters all preset values can
be displayed and modified if necessary. If the win-
dow pyrometer parameters displayed, changing of
settings on the pyrometer is blocked.
The window pyrometer parameter contains all parameter
settings described in 9, Parameters.
Choose the correct setting for your application, the actual
setting is displayed.
Notes:
 “Basic range” displays the total range of the pyrometer
automatically and can not be changed. If the sub range
is changed the new values must be confirmed with
“OK”.
 Under “Material“ you have the possibility to store the
names of different measuring objects with their emissiv-
ity values and to recall them from the list.
 If the pyrometer is equipped with a
laser targeting light the laser button
( ) is visible. It may be turned on
or off at this point. After two min-
utes the laser targeting light is
switched off automatically.
This icon opens a window that allows setting of
temperature values and the hysteresis of the limit
contacts. The set hysteresis is valid for both con-
tacts.
The open / save button enable to store and recall own pyrometer configurations.
„1 meas.“ shows the current measuring temperature in the pyrometer parameters window for
approx. 1 second.
A click on the “Test” icon opens a window that
allows the direct communication with the py-
rometer via the interface commands (see sec-
tion 14, Data format UPP
® ).
After entering an interface command (00 is the
adjusted address ex works, “ms“ is the com-
mand “reading temperature value“) and a click
on “Send“ the displayed window is opened:
This window already shows the answer of the
pyrometer in
1 /
10
°. The actual temperature
reading is 1513,8°C.
“Len“ indicates the length of the answered data string, incl. Carriage Return (Chr(13)).
In the lower part of the window the connection with the preset baud rate can be checked. Here the command
was send 500 times with 19200 baud. It has taken 4.53 seconds and no transmission errors has occurred.