6 menu item "card, 7 menu item "help – Lenze PCM 310 PCMatic Slot Controller Benutzerhandbuch

Seite 60

Advertising
background image



‚

58

If not all files of the block are available on the PCMatic, a Timeout notice is displayed,
which must be confirmed by selecting OK. After this, the procedure can be continued or
discontinued.

If the files which are to be copied are already present on the data medium selected as the
destination, it is necessary to confirm that they should be overwritten.

Note!!

If "Firmware-Download" is invoked, the PLC software is halted!!

After all files have been transferred, the notice "Transfer additional firmware files (Y/N)" is
displayed. By selecting "Yes", additional firmware files can be transferred (by once again
calling up the appropriate menu). By selecting "No", the PCMatic

®

is restarted.

7.6 Menu item "Card"

In this menu, the recognised PCMatic

®

PLC´s are displayed together with the PCMatic

®

type and the version number. The PCMatic

®

currently being used by the remote program

is marked with a tick on the left side next to its description. It is possible to change to
another PCMatic

®

by clicking the appropriate line.

7.7 Menu item "Help"

Under this menu there is currently only the submenu "About", which displays the program
name with its version number.

Advertising