Connection and commissioning, Step 1: connecting the unit and switching it on, Pic. 1 – Auerswald VOICEMAIL CENTER 461.2 Benutzerhandbuch
Seite 42
Connection and Commissioning
42
C
ONNECTION
AND
C
OMMISSIONING
The following sections provide step-by-step instructions for connecting your Voicemail Center
461.2 and configuring it for operation with an Auerswald PBX system. Examples show how
to set up a Private Mailbox and a Global Mailbox.
Private Mailbox
...
: The term Private Mailbox refers to a separate answering
machine for a single subscriber of the PBX system. Voicemail Center 461.2 supports up to
four separate mailboxes for four internal subscribers of the PBX system.
Global Mailbox
o 1
...
o 6
: The term Global Mailbox always refers to the answering machine
for the external numbers you have specified in the PBX system.
If you wish to set up a Global Mailbox but no Private Mailboxes, leave out steps 5-8.
If you wish to set up Private Mailboxes but no Global Mailbox, leave out steps 9-12.
Step 1: Connecting the unit and switching it on
To use your Voicemail Center 461.2, you need
to connect all the necessary cords (see
A. Connect the RJ-11 plug (6P/6C) of the AC
adapter to the jack marked POWER on the
bottom of your Voicemail Center 461.2.
B. Connect one of the two RJ-11 plugs (6P/
4C) of the telephone cord to the jack
marked LINE on the bottom of your Voice-
mail Center 461.2.
C. Connect the second RJ-11 plug* (6P/4C)
of the telephone cord to the appropriate
jack on the analog port of your PBX sys-
tem. For details, please refer to the section
"Connection of Analog Devices" in your
PBX system user manual.
D. Connect the AC adapter to a freely acces-
sible 230 V mains power socket.
*
In Germany, you will also need an RJ-11 to TAE adapter.
Pic. 1
PBX