JUMO 707030 dTRANS T03 2-Wire/3-Wire Transmitter Operating Manual - Handbuch (Seite 73)

29
3 Setup program
3.7.5 Data transfer to device
The current setting is transferred to the transmitter by the setup
program using Data transfer
 Data transfer to device. Adjustable
transmitters have to be calibrated before the data transfer.
v
Chapter 3.8 “Calibrating the range”
3.7.6 Data transfer from device
The current setting of the transmitter is read out with Data transfer
 Data transfer from device and shown in the setup program. The
Setup data info (File info header and File info text) information will
not be lost as a result of the readout, i.e. they will not be overwrit-
ten.