TechniSat TechniRouter 5/1x8 K - Handbuch (Seite 28)

28
EN
3 Devices in the TechniRouter Family
3.1 TechniRouter 5/1x8 G (Art. No. 0000/3290) and 5/2x4G (Art. No. 0000/3292)
These multiswitches are used as base units for
distribution. They switch the signals from two satellite
positions (8 satellites IF banks) to up to 8 subscribers.
They make either 8 or 4 output channels (per cable) in
the IF frequency band 950-2150 MHz available. The
individual subscribers gain unrestricted access to all
digital programs.
In the satellite field, the subscriber lines have a strong
and slope-equalized amplification.
The terrestrial and the return path are passive and flat
over the frequency.
3.2 TechniRouter 5/1x8 K (Art. No. 0000/3291) and 5/2x4 K (Art. No. 0000/3293)
This cascading matrix for 8 subscribers is installed together
with a base unit (TechniRouter 9/1x8 G or 9/2x4 G) and
when used with an intermediate amplifier, up to four additional
units can be cascaded in series.
The current supply is provided from the base unit onto all
trunk cables in the cascade, in doing so its slide switch must
be in position "cascade". The current supply is passed the
cascading matrix without internal cross-linking.
3.3 Accessories
All sockets, distributors and amplifiers must be compatible for the Sat IF domain and include a DC
bypass. For wall sockets, a
DC-bypass in the trunk-line and a diode-decoupled DC-bypass in the tap must be present.
The terminal socket, likewise, must have a diode-decoupled DC-bypass too.
The DC outlet is required for the power supply for the TechniRouter and to transmit the control
signals. The diode decouples the power supplies of the receivers.
It is recommended to possibly use only one diode in the line between receiver and TechniRouter.
Single cable wall socket with DC-Thru, decoupled with diode
TechniPro Tap loss Art. No.
600-10 10 dB 0000/3180
600-13 13 dB 0000/3181