TechniSat TechniRouter 5/1x8 K - Handbuch (Seite 41)

41
EN
6 Technical Data
1) Values at the lower ... upper band limits
2) All other trunk and subscriber lines with signal
3) Conforming to EN 60728-3: namely IMA3 at the output: 35 dB
TechniRouter 5 / 1x8 G 5 / 1x8 K 5 / 2x4 G 5 / 2x4 K
Article number 0000/ 3290 0000/ 3291 0000/3292 0000/3293
Return path, terrestrial: 5..790 MHz
Satellite: 0.95 ... 2.15 GHz RW /
Terr.
Sat.
RW /
Terr.
Sat.
RW /
Terr.
Sat.
RW /
Terr.
Sat.
Number of trunk inputs 1 4 1 4 1 4 1 4
Number of trunk outputs 1 4 1 4
Number of subscriber cables 1 1 2 2
Subscriber per cable maximum 8 maximum 8 maximum 4 maximum 4
Subscriber number and
receiving channels
(User bands)
channel 1 : 1284 MHz
channel 2 : 1400 MHz
channel 3 : 1516 MHz
channel 4 : 1632 MHz
channel 5 : 1748 MHz
channel 6 : 1864 MHz
channel 7 : 1980 MHz
channel 8 : 2096 MHz
channel 1 : 1284 MHz
channel 2 : 1400 MHz
channel 3 : 1516 MHz
channel 4 : 1632 MHz
Trunk loss
2...3 1)
dB
3 ... 5
dB
2...3
dB
3...5
dB
Gain of the subscriber signals
-1 dB
13...18
dB
-8 dB
13...18
dB
-5 dB
17...22
dB
-12 dB
17...22
dB
Reflection loss 10 dB
Isolation Trunks
Subscriber 45 dB 2)
30 dB
Input level, satellite signal
recommended
70 dBµV
minimum (
=ˆ
sensitivity)
40 ... 35 dBµV, although the subscriber cables, depending on
length, must be supplied with far higher levels.
maximum 80 dBµV 3)
Phase noise -60 dBc/Hz (SSB @ Δf = 1 kHz from the carrier)
Power supply
TechniRouter & LNB are supplied from the receivers, optional for LNB:
wall power supply 230 V / 13V, 460 mA DC,short and overload protected
Power requirement in operation Maximum 5 W / 410 mA from the receiver
receiver off 0 W without power supply / 3 W with power supply with LNB
(200 mA) ∅ p.a.
Depending on TV habits, Benchmark 10 kWh (without power supply)
Control by the receiver
DiSEqC-Protocol as per to EN 50494
=ˆ
Unicable, OLT, SCR or SCD
Special features Traffic indicator = installations aid, no power supply necessary
Screening attenuation In accordance with EN 50083-2 (TechniSelect S)
Environmental conditions -25...+55°C, Surge protection at inputs and outputs: < 5 kV, IP 50
Intermediate amplifier 5Z(2)/NT, (double) tap 5/2A, passive distributor 5P
Accessories
deployable in the trunk
deployable in the
subscriber line
attenuator, splitter,
loop through sockets with 10 dB or 13 dB tap loss, terminal socket
Dimensions l x w x h(mm),weight G : 150 x 114 x 43 , 0,4 kg K : 150 x 123 x 43 , 0,4 kg